Featured
Washing Electric Blanket Sunbeam
Washing Electric Blanket Sunbeam. If you notice blinking, check. You may wash this electric heated blanket in cold water and mild soap for 15 minutes.
In some cases, you have to wait for a few minutes before plugging the cord back into the outlet. Do not wash in hot water or with bleach. Once it’s soaked, wash the blanket in mild soap and water on the “delicate” or “gentle” setting for 2 minutes.
You May Wash This Electric Heated Blanket In Cold Water And Mild Soap For 15 Minutes.
Sunbeam® heated bedding care and cleaning. Machine wash in cold water on the “gentle” cycle for two minutes. Prior to washing or storing your heated bedding product:
While You Could Simply Let The Cycle Run, Some Recommendations Suggest A Special Soaking Period After The Machine Fills With Water And Detergent.
Please turn on the blanket and set it to the highest temperature for 5 minutes. How to troubleshoot sunbeam electric blankets. I have had my sunbeam for three years now and i wash it once an month and have never had a problem.
Once You Feel That The Blanket Is Clean, Drain The Tub.
•disconnect power cord from wall first, then detach control cord from the heated product. Heated blankets are a great investment for cold sleepers. •check that cords are not connected and wires have not worn through the fabric.
Set Your Washing Machine To The Gentle Or Delicate Cycle, And Use A Mild Detergent.
Next, scrape the dirt that has left on the blanket. Remove the laundry detergent with a moist clean cloth until rinsed. Unplug the power cord and place the blanket in the washing machine on the gentle cycle.
Start The Washer And Let It Agitate For 2 To 3 Minutes, Then Skip To The Rinse Cycle.
And if i put it in the washing mahcine, (like the label says to) then for some reason it quits working. First of all, unplug the blanket and remove the control cord. Rinse in fresh, cold water.
Popular Posts
How To Fix Electric Power Steering Problems
- Get link
- X
- Other Apps
Comments
Post a Comment